Yak-3 Soviet Air Force Fighter Eduard 1/48

I’ll build this Eduard Soviet fighter, Yak-3. The orange ProfiPack has colored photo-etched parts, making it feel richer than standard modeling.

There are a few parts and the impression that I saw it was a simple injection plastic model kit. The part number is not assigned to the runner, and it seems to assemble compared with the manual. It will also struggle to fit parts.

I appreciate that the photo-etched parts and masking sheet are attached.

Marking can be selected from 5 types. The basic camouflage paint is the same. I think that I choose flashy coloring from among them.

The cockpit color is C522 clear yellow by the manual, but C522 was the Imperial Japanese Army tank color’s land color. Maybe the color C522 fits the cockpit. German gray is OK, I suppose. I painted the various parts in the same color and tried to paint them first. Since parts will be shaped, there will be parts to paint again.
(2019/06/23)

I used many colored photo-etched parts in the cockpit. I have skipped some work because I cannot do very detailed work. There is an instruction to process and attach a very thin plastic rod.

In the case of the same Eduard Polikarpov small fighter I made before, I could not see too much detail even if I assembled the cockpit with photo-etched parts. I took some pictures for now.

This cockpit panel is made by combining about four photo-etched parts.

How to install the seat belt might be different. But I can see the fine printing on these parts and have a sense of precision.

The working of the lever was bothersome and omitted, but I liked the precision of the cockpit panel.
(2019/06/26)

What can I say about this kit? Is it a simple injection? There are no dowel holes for fitting parts. It is necessary to paste and attach small parts, in my sense.

I’m checking the canopy fitting temporarily; there is a little gap. Maybe I can fix this later.

Canopy masking is easy and pleasant because it contains a masking sheet. It is very convenient, and I am as happy as colored etched parts.

On the left wing, there is a pitot tube. It is standard work. I changed it to a metal pipe.
(2019/07/01)

The exhaust pipe was drilled with the tip of the design knife. It’s still rough. I will pour Mr. Cement and make the surface smooth later.

I got lost in the painting process, and in this case, I decided to paint after the landing gear was completely bonded. I have to retouch the color that first blew points. I like to assemble first and paint later as much as possible.

I think the Eduard color specification on the underside of the aircraft, Mr. color 323 light blue, is different. It feels so unnatural that it is too bright. I used No. 74 Air Superiority-Blue.
(2019/07/05)

I masked the lower surface of the aircraft. Because it was a small fighter, it was not too much trouble.

It is an aircraft that is quite plainly painted. It is a camouflage paint that seems to blend into the winter earth of Russia or Eastern Europe.

I ignored the color specification of the instruction and painted it with my favorite color. Mr. Color No. 324, light gray, and No. 317 gray FS 36231 and blue are as described above.

The marking of my choice is flashy. It will be near completion soon. Steam is making a summer sale again. I feel that modeling will likely be jacked up when I buy a game.
(2019/07/07)

Yak-3 has been completed. Yak is the meaning of A.S. Yakovlev Design Bureau. So far, it was superior to Luftwaffe, the Soviet Air Force operating this Yak-3 in 1943, and it became possible to fight more than equally.

Armed with one 20mm gun and two 12.7mm machine guns. The Yak-3 has good low to medium-high athletic performance, equal to or better than Me109. A total of about 4,800 fighters were produced.

According to memoirs, this Yak-3 was dedicated to him for his role in the saving of a vessel in the Amursk Flotilla. It is a quotation from the instruction manual of Eduard. Although this is a relatively well-known and often illustrated aircraft, details of it and its pilot, Lt. S. I. Rogovoi, are more obscure. Semyon I. Rogovoi served with the 64th GIAP / 4th GIAD from October 1944 to May 1945 as a flight leader, and by the end of the war, he gained a minimum of five confirmed kills.

I’m used to Hasegawa and Tamiya kits, so assembling is tricky. The number of parts is small, though.

I forgot to attach the rearview mirror to the canopy. This is impossible to correct. I also filled in the gap between the canopy and the fuselage with the putty, so I didn’t want to open up and add more parts. Unfortunately, I don’t correct it this time.

I thought it was a 1/72 scale kit because of this size. It is a small but good-performing, mass-produced fighter that has overwhelmed the German Air Force since WWII mid-stage. It is good to make Eduard’s Profi Pack once in a while.
(2019/07/10)